The TT Multicam MOLLE belt is a stand alone base for a belt kit. The belt is in two parts: a sturdy inner belt made of double layered 50mm Cordura narrow webbing and mounted on an adjustable 50mm quick release buckle with plastic slide adjusters on left and right, and a fully padded support belt with three horizontal straps of 25mm MOLLE webbing mounted on 6 articulated panels. The 25mm MOLLE webbing is faced with genuine Crye 500D Cordura fabric and the articulated panels are also made of genuine Crye 1200D Cordura fabric. The inner belt is fully detachable and retained in place with velcro on the rear. The support belt wraps around this inner belt, with 3D mesh padding on the body side which helps to spread the load and permits ventilation, and the Multicam outer side. The articulated panels open together and are fixed down top and bottom in the front. The three horizontal straps of MOLLE webbing are mounted next to each other and help to support each other as well as providing good space for mounting of pouches either in a higher or lower position. The padded section is stitched down at intervals which are different to the articulations of the outer panel sections, helping to give a variety of flex points on the belt and mimicking the motion of the body more positively. Belt comes in size M and L.

Available options are: M , L .

The belt as it is folded open fully, showing the articulated sections.

The back of the belt opened up to show the detachable inner belt and the panel section which is stitched down along the top of the belt and also on the front right and front bottom corners

Another view of the belt from the front.